Examples
Please click on a diagram and supply all dimensions shown.
Some common examples of sizing are shown next to the diagram. Note that
while there are many industry standard common sizes, the item that you have may
not be a standard -- We only will know if you provide all the dimensions
otherwise we are left to assume and you know what happens when we assume!
This is especially true with Diamond and CBN wheels as there really are no
standard dimensions. So please be specific and provide all your product
dimensions. We need this to quote properly. Note that you can print-out the diagrams, fill in your dimensions, and email or fax it to us!
Grinding Wheels
Type 1 Straight
Example of Dimensions Needed To Quote = 10x1x1-1/4 (DxTxH)
Type 2
Cylinder
Type 5 Recess 1/s
Example of Dimensions Needed To Quote = 8x2x1-1/4 recess 6x1/2 (DxTxH, PxF)
Type 6 Plain Cup
Type 7 Recess 2/s
Type 11 Flared Cup
Example of Dimensions Needed To Quote = 5/4x3x1-1/4, rim=1, back=1 (D/JxTxH,
W=1, E=1)
Type 12 Dish
Type 13 Saucer
Type 17 Cone
Type 18 Plug
Type 20 Dish 1/s
Type 21 Dish 2/s
Type 22 Dish/Recess
Type 23 Dish/Recess
Type 11 Threaded
Type 26 Dish/Recess
Type 50 Plate Mount
Example of Dimensions Needed To Quote = 6x4x1, 4 each 1/4 holes on a 4-3/4 bolt
circle
Type 2 Nut Inserted
All Others
Diamond & CBN Wheels
Type 1A1 Example of Dimensions Needed
To Quote = 10x1x1-1/4, x=1/8
Type 4A2 Example of Dimensions Needed
To Quote = 8x1-1/2x1, x=1/8, w=3/16, j=5
Type 1V1 Example of Dimensions Needed
To Quote = 8x1x1-1/4, x=1/8, V=20 degrees
Type 1E1 Example of Dimensions Needed
To Quote = 10x2x1-1/4, x=1/4, w=1/4, e=1/2
Type 6A2
Type 1F1
Type 12V9
Type 11V9
Type 12A2
Type 14A1 Example of Dimensions Needed To
Quote = 10x1/2x1-1/4, x=1/8, u=1/8, j=6
Type 15A2
All Others
Segments
Segments are typically measured by width, thickness and height. This is
all we usually require; However, if your segment has a radius or is a trapezoid
shape, please provide these measurements as well.
FMR(AA-1)
FMR(AA-2)
Blanchard(BL,BLA)
Bridgeport(BR)
Capital(CP)
Carborundum(CA)
Cortland (CD,CD-XL)
Crossley(CR)
Diamond(DIA)
Gockel(SD,SA,BA)
Hanchett(HA,HL,HM)
Red Anchor(RA)
Harris-Seybold(SE)
Hill Acme(HI)
Lumsden(SB,SC)
Norton-Mattison(NO)
Pacific(PA)
Peninsular(PE)
Reform(SA,SB,SO)
Rogers(RO)
Safety(SA)
Sterling-ITT(STG)
Others (SA-SF)
Summary Page Of Segment Shapes
Other
Please provide as many dimensions as you can: Specify the
width, height, length, etc..
| Use your browser's back button to return
to the previous page |
